If the specific enthalpy at the exit of the turbine is 2700 kJ/kg, what is the heat rejected from this Rankine Cycle in units of kJ/kg?

7.
Question 7
If the specific enthalpy at the exit of the turbine is 2700 kJ/kg, what is the heat rejected from this Rankine Cycle in units of kJ/kg?

1 point

2750 kJ/kg

3219 kJ/kg

1940 kJ/kg

1335 kJ/kg

Other Questions Of This Category

Consider a Rankine power plant that has uses no reheat with water as the working fluid. The steam generator operates at 100 bar and the condenser operates at 10 bar (absolute). The water enters the…

Consider a heat engine with the heat input of 900 kJ at a temperature of 500 °C. The heat engines rejects heat to the the surroundings at a temperature of 25 °C. The engine produces 375 kJ of work.…

Which statement is false?

As you move from the inlet state to the exit state of the pump, which of the following is true?

What is the specific enthalpy at the exit state of the condenser? Assume the steam leaves the condenser as a saturated liquid at 10 bar (absolute).

Determine the back work ratio given the following fictional specific enthalpies used in the previous problem: h_1 = 300 kJ/kg, h_2 = 580 kJ/kg, h_3 = 1460 kJ/kg, h_4 =750 kJ/kg. (Assume that state 1…

Determine the efficiency given the following fictional specific enthalpies: h_1 = 300 kJ/kg, h_2 = 580 kJ/kg, h_3 = 1460 kJ/kg, h_4 =750 kJ/kg. (Assume that state 1 is the entrance to the compressor,…

The Brayton cycle has the same 4 processes as the Rankine cycle, but the T-S and P-V diagrams look very different; why is that?

What is the efficiency of a Brayton Cycle if the specific work into the compressor is 330 kJ/kg and the specific work out of the turbine is 675 kJ/kg and the specific heat transfered into the heat…

Strategic Organization Design Coursera

In ideal Rankine cycle the pump and turbine are

Assume the turbine is ideal and adiabatic. What is the specific entropy of the steam as it exits the turbine and enters the condenser? Hint: you need to use the results from the previous problem.

Consider a heat engine with the heat input of 900 kJ at a temperature of 500 °C. The heat engines rejects heat to the the surroundings at a temperature of 25 °C, and produces 375 kJ of work. What is…

Consider a heat engine with heat input of 900 kJ at a temperature of 500 °C. The heat engines rejects heat to the the surroundings at a temperature of 25 °C, and produces 375 kJ of work. What is the…

Determine the q_h and q_l of a Rankine cycle using steam as the working fluid in which the condenser pressure is 10 kPa. The boiler pressure is 2000 kPa and the steam leaving the boiler is a saturated…