Manufacturing Process with Autodesk Fusion 360 Quiz

Manufacturing Process with Autodesk Fusion 360 Quiz Answer. In this post you will get Quiz Answer & Assignment Of Manufacturing Process with Autodesk Fusion 360

 

Manufacturing Process with Autodesk Fusion 360 Quiz

Offered By ”Autodesk”

Enroll Now

Week 1 quiz

1.
Question 1
How can you link two
dimensions together in a sketch?

1 point

• Select a dimension while
  the dialog is highlighted.
• Manually enter the
  dimension name, ex d1.
• Dimensions can’t be linked.
• Right click and select “link”.

2.
Question 2
True or false: When constraints are hidden, applied
constraints are still visible when a sketch entity is selected.

1 point

• True
• False

3.
Question 3
What type of file is used
to convert toolpath data to machine readable code?

1 point

• NC generator.
• Toolpath generator.
• Post processor.
• Filer converter.

4.
Question 4
True or false: Construction
geometry can be used for extrudes.

1 point

• True
• False

5.
Question 5
True or false: While
simulating a toolpath, you can hide the tool.

1 point

• True
• False

 

 

Week 2 quiz

1.
Question 1
Setups contain information
about the stock, coordinate system and what else?

1 point

The type of machining
process.

The spindle rpm.

The tool feed rate.

2.
Question 2
True or false: Facing
toolpaths can use Chip Thinning.

1 point

True

False

3.
Question 3
What does simulating a
toolpath do?

1 point

Evaluates the amount of
coolant needed.

Determines heat in the
tools.

Animates material removal.

Analyzes tool wear.

4.
Question 4
Creating a new tool can be
done where?

1 point

Sample library.

Local library.

5.
Question 5
What directions are
multi-axis flow isocurves defined as?

1 point

X

U

V

Y

 

 

Week 3 quiz

1.
Question 1
What functionality below is
the micro CC3D lacking?

1 point

Flight Stabilization.

Altitude hold.

FlexiPort.

PWM outputs.

2.
Question 2
True or false: All power
distribution boards have the same functionality.

1 point

True

False

3.
Question 3
When picking a propeller
what benefit does a BN have over others?

1 point

Larger diameter.

More surface area.

Lighter weight.

4.
Question 4
True or false: Stripping
plastic is a concern when using thread forming screws on a 3D printed part.

1 point

True

False

5.
Question 5
What is the function of the
airframe?

1 point

To hold all the components.

To provide lift.

To funnel air.

 

 

Week 4 quiz

1.
Question 1
What affect does a 3 blade
propeller have in relation to a 2 blade propeller?

1 point

Increase flight time.

Reduced flight time.

Faster change of direction
in flight.

2.
Question 2
What is a good tip when
learning to fly?

1 point

Fly using only the camera
view.

Hover as low as possible.

Instantly perform advance
maneuvers.

Keep the drone facing away
from you.

3.
Question 3
What does it mean to have
drift in the horizon?

1 point

A drone that is very
maneuverable.

A drone that wants to roll
on its own.

A drone that wants to yaw
on its own.

4.
Question 4
Before you make changes to
the flight controller you have to set it to?

1 point

Always armed.

Always disarmed.

5.
Question 5
What are some options for
increasing flight time?

1 point

Unplug unnecessary
components.

Reduce weight.

Lower throttle maneuvers.

Larger capacity battery.

 

 

 

Course assessment

1.
Question 1
What sketch constraint can
make 2 circles the same diameter?

1 point

Fix.

Coincident.

Equal.

Same.

2.
Question 2
What area in a sketch
allows you to show/hide sketch constraints?

1 point

Browser.

Right-click menu.

Sketch palette.

Marking menu.

3.
Question 3
How do you rename features
in the timeline?

1 point

They can’t be renamed.

Left-click once.

Double click.

Right-click > Rename.

4.
Question 4
What key can you press to
override a persistent constraint?

1 point

CTRL.

SHIFT.

ALT.

TAB.

5.
Question 5
What shortcut key changes a
line to/from construction geometry?

1 point

P

C

X

T

6.
Question 6
If dimension d30 = 10mm,
what would we enter in the dimension box for d31 so that it is always twice the
length of d30?

1 point

10 + 10.

D30 + 10.

D30 *2.

7.
Question 7
What operation type is used
for a waterjet when creating a CAM setup?

1 point

Mill.

Mill/Turn.

Cutting.

8.
Question 8
What multi-axis operation
allows you to define the isocurve direction?

1 point

Pencil.

Flow.

Contour.

Swarf.

9.
Question 9
How many wires does an ESC
have?

1 point

7

5

6

10.
Question 10
How many miles away from an
airport must you be before you can hobby fly without notifying the FAA?

1 point

1

5

3

10

 

Peer-graded Assignment: Plan a new drone design

Download